A slim-fitting sporty cut and the combination of Grade-A leather with strategically placed stretch panels make this a versatile jacket that works both on the bike and off the bike. It features a removable hydratex® 3L liner for true waterproof performance, and can easily be paired to either the fully vented leather/mesh Gear 2 trousers or any of the full-leather sport trousers with its convenient connection zippers. On warm summer days the membrane can be removed and replaced with a Challenger cooling vest upgrade for ultimate hot-weather performance.
- adjustment straps
The jacket is prepared for the Challenger cooling vest insert. The Challenger can be zipped directly into the outer shell with the connection zippers.
Thanks to the short and long connection zipper, this jacket is/these trousers are compatible for pairing with any pair of trousers/any jacket in the REV'IT! line.
- stretch fabric
- stretch lips
- tour fit
- document pocket
- inner pockets
- slit pockets
- ventilation panels
Consisting of a of high-performance Polyamide yarns with an open structure that ensures good ventilation while riding. Dynax mesh has a high melting point, tremendous tear- and abrasion-resistance, and provides high-performance protection under hot weather conditions.
This top-grain leather not only has had its surfaces sanded to correct imperfections, it has been reinforced to up its performance factor for riding on the track or street. Long-lasting and extremely protective.
This material is REV’IT!’s take on Cordura®. Consisting of 100 percent high-performance polyamide yarns, PWR | shell takes the best properties of Cordura®—a high melting point, tremendous tear- and abrasion-resistance, excellent durability—and puts the unique REV’IT! design stamp on it. This PWR | shell fabric comes in a stretch variant. 500D indicates the density of the fabric. The higher the number the better the abrasion- and tear resistance properties are.
This PWR|shell material has a wax coating for a slightly dull look.
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT™ CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
Official tests show that ProLife® far surpasses the protection standards set by the CE directive. The fabric used, elastomer, is the result of many years of research and development. A technological process is used to make the fabric microporous, with air in the microporous cells under high pressure but unable to escape. This treatment makes the fabric light, flexible, and exceptionally impact-resistant. REV’IT! has used the pre-shaped ProLife® 3D CE protector in REV’IT! motorcycle clothing since it was first introduced.
Stitching seams can be the weakest link in motorcycle garments, as they can rip upon impact. This ripping of seams can be prevented, however, through safety-stitching technology. REV’IT! uses safety stitching on garment areas at increased risk of impact (directive on the definition of risk category in zones 13595-1:2002).
A 3-layer construction. The membrane has a layer of protective tricot laminated on each side of the membrane. This results in a waterproof and breathable membrane that is also very durable. This type of membrane also offers maximum flexibility, as it can be removed from the garment: wear the membrane inside the garment when the weather demands it, or take it out when you need maximum ventilation.